SECOR Emergency Door Release Switches
Uniquely designed as part of access control system, SECOR Emergency Door Release switches are highly reliable, and easy to install, operate and reset. DWS250 also has LED and buzzer as confirmation of action and IP55 rated. All these features make SECOR Emergency Door Release one of the best in the market.
Resettable Emergency Door Release DWS250A
- Standard GPO size - fit into a standard mounting block
- Weather protection – IP55
- Easy to reset with the metal key provided
- Two isolated SPDT outputs
- Protective cover available
- Built in buzzer and LED version available – DWS250B
- Green available – DWS250A-GN
- Hole plugs included
- Warranty: 3 years
- IP55
- Contacts:
- 2 x isolated SPDT
- Voltage (max): 30VDC
- Current (max): 2A
- Resistance: 50mΩ
- Dimensions: 70mm(W) x 115mm(H) x 21mm(D)
- White or green
Resettable Emergency Door Release DWS250B
- Built in buzzer and LED as audible and visual confirmation of operation
- Weather protection – IP55
- Easy to reset with the metal key provided
- Standard GPO size -fit into a standard mounting block
- Two isolated SPDT outputs
- Protective cover available
- Green available – DWS250B-GN
- Hole plugs included
- Warranty: 3 years
- IP55
- LED and buzzer built in
- LED colour: standby green; activation red
- Voltage: 12VDC; Current: 5-20mA
- Contacts:
- 2 x isolated SPDT
- Voltage (max): 30VDC
- Current (max): 2A
- Contact resistance: 50mΩ
- Dimensions: 70mm(W) x 115mm(H) x 21mm(D)
- White or green
Protective cover DWS250C
- Protective cover for DWS250A and DWS250B
- Ideal for use in public areas to prevent them from being accidentally bumped
DWS250C - cover only
- Clear plastic
- Dimensions: 72mm(W) x 120mm(H) x 16mm(D)
Breakglass Emergency Door Release Switch DWS100
- New terminal design – easier to wire
- Double laminated safety glass design - prevents glass from being broken into pieces and attractive design
- Plastic protecting cover available
- White or green
- Contacts: 2 x isolated SPDT
- Voltage (max): 30VDC
- Current (max): 2A
- Contact resistance: 50mΩ
- Dimensions: 85mm(W) x 85mm(H) x 50mm(D)
Resettable Emergency Door Release Switch DWS200
- Glassless and resettable
- Detachable terminal – easy to wire
- Plastic protecting cover available
- White or green
- Contacts: 2 x NO and 2 x NC (all isolated)
- Voltage (max): 30VDC
- Current (max): 2A
- Contact resistance: 50mΩ
- Dimensions: 86mm(W) x 89mm(H) x 56mm(D)
Resettable Emergency Door Release with LED and Buzzer DWS201
- Glassless and resettable
- Four LEDs around the edge of the unit indicate where to press in the dark, when in an emergency
- Built with Emergency status bar – green and red
- Easy to reset with new design of reset key
- 12 or 24VDC
- Built in buzzer can be set as silent, interval wailing or continuous wailing, with volume adjustable
- Triple isolated outputs – NO/NC
- Plastic protecting cover available
- Power: 12/24VDC
- Operating current:
- 12VDC - 18mA standby; 75mA operation
- 24VDC – 11mA standby; 41mA operation
- Buzzer: can be turned off or on; continuous tone and pulse sound selectable; volume adjustable
- LED:
- Green standby; red in emergency
- Red emergency LED: can be turn off or on; flashing or steady selectable
- Contacts: Isolated 3 x NO and NC
- Contacts max load: 125V/3A
- Colour: White, green
- Plastic reset key included
- Protection covers available
- Dimensions: 90 x 93 x 64mm
Protective Cover for Breakglass Emergency Switch WEC140
- Made from clear and tough polycarbonate material, UV treated
- Cost effective way of protection against accidental damage or switch activation
- Weather proof
- Large covering capacity with inside dimensions: 140mm(H) x 110mm(W) x 54mm(D)
- Can be used to protect
- Breakglass emergency door release switches
- All exit buttons, panic, emergency and shutdown buttons
- Keypads, electrical outlets and etc.
- Made from clear and tough polycarbonate material
- UV treated
- Weather proof
- Inside dimensions: 140mm(H) x 110mm(W) x 54mm (D)